If this software is cool or useful to you, consider a small donation to the programmer!
There is *no* need to pay to download and enjoy this software!
But it's a lot of work and I do it in my so-called spare time, so a couple of dollars
would be really appreciated! :)|
(Alternately, there's my Amazon Wishlist)
Click here to download:
| 2 downloads this week
238 downloads total
|Download LawCap program and Source code for Windows (168.7 k)|
This software is *only* for the DT3154 capture board. It may work with other Data Translations Frame Grabbers. It certainly will NOT work with any other frame grabbers.
This software is based on DT Open Layers 3.1. You must acquire this library from Data Translations before you can compile the code. You should not need the library to run the software, however, if you have the drivers installed.
This software supports the following:
Two inputs, Interlaced and Non-Interlaced, External Sync, Sync on Green, two external triggers (connected to any PC joystick, to trigger AVI, burst, or frame capture), adjustment of base and reference levels, automatic filename numbering, passthrough (or not) with Windows 98 compatibility hacks, compressed AVI with linking to external application for audio recording, configurable burst frame capture, and it's the only capture application of any kind that can sing and dance. (See readme.txt)
Made available through the kind donation of NFGMan, who financed it's creation. (Warning: site PG, but not work safe.)
Requires DT-Openlayers 3.1 to build.
May not work with DT boards other than the 3154 (but should give a nice detailed log in any event)
WILL NOT WORK with capture boards or webcams NOT made by Data Translation.
No support is available for this software. I no longer have the board so I can not work on the application.
|<-- Previous software in Windows (FoxxView)||Next software in Windows (DirCmd) -->|
|<-- Previous software in All (FoxxView)||Next software in All (Sand2) -->|